Home > Patch Fitting Hardware >

Polished Stainless Bottom Door Patch with 1NT302 Insert
Polished Stainless Bottom Door Patch with 1NT302 Insert
 
Our Price: $65.18

Stock Status:In Stock

Availability:: Usually Ships in 24 Hours
Product Code: PH11DPS
Qty:

Description
 
  • 2-9/16" (65 mm) Pivot Setback
  • For 3/8" or 1/2" (10 or 12 mm) Glass
  • Use Monolithic Tempered Glass

    • The Bottom Door Patch Fitting includes the No. 1NT302 Insert for use with tapered square style spindle Casma Floor Closers or 1NT404 Free Swing Pivots. Finished covers are available in four standard finishes. Gaskets are supplied that allow this Patch Fitting to be used with either 3/8" or 1/2" (10 or 12 mm) Glass.

    The following guidelines are to be used when making a door using this hardware:
    • Maximum Height: 102" (2591 mm)
    • Maximum Weight: 194 Lbs. (88 kg)
    • Maximum Width: 42" (1092 mm)
    • If the door exceeds any of these limitations, full door rails should be used.
    GLASS FABRICATION REQUIRED:
    • One 3/4" (19 mm) Diameter
    • Hole and Corner Notch
    COMES WITH:
    • Template and Instructions